Dedicated servers

RAID on the dedicated server: 0, 1, 5 or 10?

What the RAID levels do, why RAID 1 is usually enough with NVMe, software RAID or ZFS, and what RAID does not protect against.

5 min readUpdated 05.11.2026FameSystems editorial team
In short

RAID protects against the failure of one drive, not against deleted data, ransomware or a defective server. For dedicated servers with two NVMe drives RAID 1 is the sensible default: one drive may die, the server keeps running. RAID 0 doubles speed and failure risk and belongs only on systems whose data is replaceable. You need a backup in any case.

The RAID levels that occur on servers

LevelDrivesUsableToleratesSuitable for
RAID 02+100%No failureTemporary data, rendering, caches
RAID 1250%1 driveSystems, databases, game servers
RAID 53+n-11 driveLarge data volumes with HDDs
RAID 104+50%1 per mirror pairDatabases under high load

Why RAID 1 is usually enough with NVMe

RAID 5 and 10 were created to speed up slow hard disks. NVMe drives are so fast that the bottleneck is almost always elsewhere. Two NVMe drives mirrored deliver full read speed, protect against the failure of one drive and are implemented without a hardware controller using Linux software RAID or ZFS.

Software RAID or ZFS

Linux mdadm mirrors partitions and comes with every distribution. ZFS mirrors at file system level and brings checksums, snapshots and compression, which is particularly practical under Proxmox. Both detect a defective drive and keep running in "degraded" mode until it is replaced.

What happens when a drive fails

  • The server keeps running, you get a message from the RAID or your monitoring.
  • You create a ticket, FameSystems replaces the drive in the data centre.
  • The RAID rebuilds on the new drive, with NVMe in minutes to a few hours.
  • During the rebuild the server is unprotected: exactly then the backup from the day before counts.

What RAID does not protect against

A deleted directory is deleted on both halves of the mirror. Ransomware encrypts both. A file system error is mirrored. RAID secures availability, backups secure data. Anyone who confuses the two notices it at the worst moment.

FameSystems dedicated servers ship with NVMe drives. You set up software RAID or ZFS during installation, under Proxmox directly in the installer.
Matching product

Dedicated servers with NVMe

AMD Ryzen 7000, NVMe drives, 2× 10 Gbit/s, Frankfurt location. RAID or ZFS of your choice during installation.

from €121.25/month
Published 05.11.2026Updated 05.11.2026

Frequently asked questions

Short answers to the points that usually remain open after the article.

RAID avoids the outage, backups avoid data loss. For systems that must run, both; for test systems the backup is enough.

RAID 1 on NVMe practically none. Writes go to both drives, reads are distributed.

On modern servers with NVMe, software RAID or ZFS. Hardware controllers no longer bring an advantage there and are an additional component that can fail.

FameSystems, after your ticket, in the Frankfurt data centre. The rebuild then runs automatically.